HVAC software

HVAC software for small businesses that want profit on every call

CrewBrain is HVAC software for small businesses that run a few trucks and want to know what each call really earns. Service calls, maintenance plans, dispatch, the tech app, fast invoicing and timesheets sit in one place. Tech hours are tracked by job, so you can check every price against the time, parts and truck cost the call really took.

Four members of the Shine City crew standing together
Real crews, real rigs. We run Shine City and Simple Moves with CrewBrain every day. Founding members learn from crews like these.
Service-call reality

Emergency calls, maintenance plans, and a tech in the wrong part of town.

The phone rings with a no-heat call while your maintenance visits stack up and a tech sits in traffic across the city. When booking, dispatch, equipment history, and invoicing live in separate tools, you lose calls, miss tune-ups, and leave money on the table at every house.

✕Missed emergency calls. A no-heat customer can't reach you, so they call the next HVAC shop in the listings.
✕Forgotten maintenance plans. Seasonal tune-ups never get scheduled, and the recurring revenue quietly disappears.
✕Dispatch guesswork. The wrong tech gets sent across town with no equipment history in hand.
✕Invoices that drag. The job's done but billing waits until the office catches up, so cash comes in slow.
How CrewBrain helps

Built for service calls, dispatch, and maintenance plans.

Every call, customer, and tech in one dashboard.

Never let a lead go cold

Every lead and quote sits on one customer record, and a daily follow-up list shows each one still waiting, so a no-heat customer never becomes a competitor's job.

Maintenance plans that recur

Set seasonal tune-ups, filter changes, and inspections to repeat. CrewBrain puts each visit on the calendar so none slip, turning service plans into steady recurring revenue.

Smart technician dispatch

Drag calls onto the day and assign the right tech. They get the address, the job scope, and the customer's notes on their phone — no driving back for missing info.

Invoice and get paid fast

When a tech finishes the job, the invoice is ready to send, showing what's owed and what's been paid. Billing no longer waits on the office, so cash comes in faster.

Customer & job history

Every property's past service, parts, and notes live on one record, so the next visit starts informed instead of from scratch.

Fits more than HVAC

Plumbing, electrical, appliance repair — any home-services trade built on calls, dispatch, and maintenance plans runs on CrewBrain, all in one subscription.

What HVAC software for a small business needs to do

A one-truck shop can run on a phone and a calendar. Once you have three or four techs, things change. Calls come in all day, tune-ups pile up in spring and fall, and every tech is out on the road. Here is a short checklist for HVAC software when you run a small team:

  • Follow up every lead. One daily list of the leads and quotes still waiting, so a no-heat customer gets a call back.
  • Maintenance plans that repeat. Seasonal tune-ups and filter changes set to repeat, so each visit lands on the calendar.
  • Dispatch. Put the call on the calendar and send the right tech (that is "dispatch"), with the address and the job details on their phone.
  • Customer history. Past visits, photos and notes on the customer's record, so the tech knows the home before they arrive.
  • Prices you set ahead of time. Common repairs and tune-ups priced flat, so every tech quotes the same job the same way.
  • Fast invoicing. The finished call becomes an invoice that shows what's owed, ready to send before the tech leaves.
  • Profit per call. Tech hours clocked against each job, so you can compare what the call cost with what you charged.

The first six keep the day running. The last one tells you if the day made money. A full schedule can still lose money if your flat prices were set from a gut feeling instead of real times.

How an HVAC call is priced from its real costs

A flat-rate price (one set price for a job, no matter how long it takes) only works if it was built from real costs. The method is the same for a repair, a tune-up or a plan visit:

  1. Count tech hours: time at the house, plus the drive there, plus loading parts and setup.
  2. Multiply by the full cost of one person-hour. That is the wage plus payroll taxes, insurance and workers' comp, not the wage alone. Our labor burden calculator works it out.
  3. Add parts and materials.
  4. Add the truck and fuel.
  5. Divide the total by one minus your margin. Margin is the share of the price you keep after job costs. Your office, ads, software and your own pay come out of it.

Margin is not markup. Adding 50% on top of your costs gives you a margin of only 33%. See the difference in our margin vs markup calculator.

Worked example: a flat-rate repair, planned vs what the clock showed

ItemHow the price was plannedWhat the clock-ins showed
Tech hours (with drive and setup)1.52.5
Labor at $55 per person-hour$82.50$137.50
Parts$40$40
Truck and fuel$15$20
Job costs$137.50$197.50
Flat price at a 50% margin (job costs ÷ 0.50)$275$275 (already quoted)
Left after job costs$137.50$77.50

Illustrative numbers only, to show the method. The $55 is the full cost of one person-hour, not a wage. These are not a price list and not a promise of what your jobs will earn.

The customer pays the same $275 either way. But if this repair often takes 2.5 hours, your real margin is about 28%, not 50%. That gap has to pay for the office, the ads and you. One call like this is fine. A flat price that runs long every time is a leak.

CrewBrain tracks tech hours by job and adds up the drive time, parts and truck cost of every call. That shows you which flat prices to raise and which ones are fine. To set your prices, read flat rate vs hourly pricing, test a number in the job price calculator, or see how job costing for service companies works after the call is done.

Your ready-made setup

Services we preload for HVAC — already priced

Your account starts with these common HVAC services and approximate prices already loaded, so you are not starting from a blank page. Your dedicated account manager fine-tunes them with you.

Diagnostic / Service Call
Trip out to inspect and diagnose a heating or cooling problem.
$95
waived with repair
AC Tune-Up
Seasonal inspection and cleaning of an air conditioning system.
$120–200
Furnace Tune-Up
Seasonal inspection, cleaning and safety check of a furnace.
$120–220
AC Repair
Repair a failed air conditioner including parts and labor.
$200–900
Furnace Repair
Repair a malfunctioning furnace including parts and labor.
$200–1000
AC System Install
Supply and install a new central air conditioning system.
$4500–9000
Furnace Install
Supply and install a new high-efficiency furnace.
$4000–8500
Heat Pump Install
Supply and install a ducted or ductless heat pump system.
$6000–14000
Maintenance Plan (annual)
Yearly membership with two tune-ups and priority service.
$180 / yr
Duct Cleaning
Clean the home's supply and return ductwork.
$350–700

Approximate 2026 starting prices — fully editable. CrewBrain can price each service flat, by the unit (sq ft, linear ft, hour, item), or with your own formulas.

Questions

HVAC software FAQ

Can CrewBrain manage HVAC maintenance plans?

Yes. Set recurring maintenance visits — seasonal tune-ups, filter changes, inspections — and CrewBrain puts each one on the calendar so none get forgotten, turning service plans into steady recurring revenue.

Does it dispatch technicians to service calls?

Yes. Drag service calls onto the calendar, assign the right tech, and they get the address, the customer's notes, and the job details on their phone. You see every tech's day at a glance.

How fast can I invoice and get paid?

When a tech finishes the job, the invoice is ready to send right away, and it shows what's owed and what's been paid. You keep your own Square or Stripe for card payments.

Is it only for HVAC, or other home services too?

It fits HVAC, plumbing, electrical, appliance repair, and most home-services trades. Any business built on service calls, dispatch, and maintenance plans runs well on CrewBrain.

What is the best HVAC software for a small business?

The one that fits how you run. A one-truck shop mostly needs scheduling and invoicing. Once you have a few techs, look for one record for every customer, maintenance plans that repeat, dispatch to a tech app, fast invoicing, and tech hours tracked by job, so you can see which calls make money. CrewBrain is built for that second group.

Can HVAC software help me set flat-rate prices?

CrewBrain can price each service flat, by the unit, by the hour or with your own formulas. Because tech hours are clocked against each job, you can check each flat price against the time, parts and truck cost the calls really took, and raise the ones that run long.

Price every job right

Know what each job earns before you quote the next one.

Most of the money in a service company is won or lost in the quote. CrewBrain adds up the crew time, drive time, materials and vehicle cost of every job, so you can see which ones make money and which ones quietly lose it. Start with our free guides: setting a trip charge, how to price a job, margin vs markup (with a calculator) and job costing.

Run your HVAC company from one brain.

Apply as a founding member. If we're a fit, your account manager sets up service calls, dispatch, maintenance plans, and invoicing in one place with you. The timing is agreed for your company.